：）Tips：👇👇👇
1. Upon arrival, please inspect the package for any damage and ensure all accessories are included.
3. If you have any questions, feel free to reach out to us via the email below.
📧：Support @yfs.life
：）Before you install this ceiling fan, you may want to know the preparation👇
🤔Q1: What size room is the ceiling fan suitable for?
Fit for use in rooms up to above 20FT*20FT in size, including bedrooms, living rooms, kitchens, offices.
🤔Q2: What ceiling height is suitable for the ceiling fan with light?
Ensure the fan will be at least 7 ft. above the floor. And the blades will be at least 30 in from any obstructions.
🤔Q3: What tools do I need to install the ceiling fan?
The tools include screwdriver, telescoping ladder, pliers, electrical adhesive tape, and safety gloves before installation.
🤔Q4: Do I have to turn off the power to install the ceiling fan?
For the sake of your life and safety, turn off the power at the main fuse or circuit box before installing the fan to avoid serious injury or death.
🤔Q5: Does the ceiling fan fits dimmer switch or fan‘s gear switch?
1. Do not use the fan with any solid-state speed-control device, dimmer or variable-speed switch unless it’s specifically designed for use with a ceiling fan.
2.The ceiling fan fit traditional wall switches (please refer to the Important part of the instruction manual for Pre-installation Advice) , and the traditional wall switches can control the the fan and light on/off.
：）when you install this ceiling fan, you may will meet some toubles👇
🤔Q1: How do I secure the tray to the ceiling?
Step 1. Determine whether the ceiling is made of wood or concrete, and whether it is equipped with a junction box.
Step 2. Find the appropriate screws for each of the 3 types of ceilings and screw them in.If you can’t solve the problem, shoot the video or contact us at 📧support@yfs.life.
Note: Screws for attaching ceiling tray to the junction box are not included.
🤔Q2: Why is there only one screw hole at the lever when replacing the downrod?
Step 1. Remove the pins from the lever and then take the top off.
Step 2. Pins must be mounted with a screw hole on one side of the end.
🤔Q3: When connecting the canopy and decorative cover to the motor the pin won’t go through the wires and the protective sleeve on the outside of the wires is very stiff. can I cut it off?
Step 1. The protective sleeve cannot be cut off, it helps to strengthen the insulation of the wires as well as wear and tear, and it needs to be moved to the top.
Step 2. Separate the two wires that the protective sleeve is binding and align them with the pin holes.
🤔Q4: I put the lever on the hanger bracket, but it was too loose.
Step 1. Take care to place the lever correctly in the notch of the hanger bracket, then rotated it left and right.
Step 2. Until it clicks, it cannot be rotated any more. Well down!
🤔Q5: How do I connect the three round wires to live wire, neutral wire and earth wire?
Step 1. Black wire matchs live wire, white wire matchs neutral wire, and green/yellow wire matchs earth wire.
Step 2. Connect the wires together with wire nuts. If you can’t solve the problem, shoot the video or contact us at 📧support@yfs.life.
🤔Q6: How to keep the light and wind speed settings before turning them off？
Step 1. Select your desired color temperature, brightness.
Step 2. Turn off the light and wait for more than 10 seconds.
Step 3. Turn on the lights.Lights stay at previous settings. If you can’t solve the problem, shoot the video or contact us at 📧support@yfs.life.
🤔Q7: How to cancel the remote control beep？
Step 1. Find the mute button on the remote and press it to cancel the remote control beep.
Note: Pressing it again to restarts the feedback sound.
：）After you install this ceiling fan, you may want to know the After-Sale Support👇
🤔Q1: How long is the warranty on fan lights?
In order to provide users with better product experience and after-sales service, we provide a lifetime warranty for the motor and a 2-year warranty for the others.
🤔Q2: Can LED light panels be replaced by the user?
LED light panels can be removed and replaced, but need to be purchased separately.
🤔Q3: What should I do if my remote control fails to work ?
There are three ways to control the fan: remote control, app control and wall control. You can control the light and wind speed by mobile APP when the remote control doesn‘t work. Note that the wall control switch can only control the light and wind speed on and pause.